Print Page - Clock from 30003 and 7879 port

Title: Clock from 30003 and 7879 port
Post by: itestoo on September 25, 2009, 03:42:08 PM

I have seen a big différence between many Radarbox for my project about the clock timer.
The data export file was synchronize with the local time from the PC, and if this last was wrong all data can't not be synchronize correctly ?

So is it possible to grab in the ADS-B Frame the good clock or time ?

Regard's
Laurent
www.radarvirtuel.com/googlemaps

Title: Re: Clock from 30003 and 7879 port
Post by: DaveReid on September 25, 2009, 04:41:50 PM

Quote from: itestoo on September 25, 2009, 03:42:08 PM
So is it possible to grab in the ADS-B Frame the good clock or time ?

ADS-B frames don't contain a timestamp.

Title: Re: Clock from 30003 and 7879 port
Post by: itestoo on September 25, 2009, 04:48:55 PM

Ok Dave thank's
So i suggest a GPS inside the Radarbox to be sure about Timestamp
Regard's
Laurent

Title: Re: Clock from 30003 and 7879 port
Post by: OKC-Steve on September 25, 2009, 05:07:46 PM

The mode-s data is decoded in the PC, so the radarbox is just shipping bits to the PC. The data becomes a target inside the PC, so all you have to do is install an NTP time service and you are good to go.

AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: itestoo on September 25, 2009, 03:42:08 PM