AirNav Systems Forum

AirNav Radar => AirNav Radar Screenshots => Topic started by: chungping on December 27, 2007, 09:52:04 AM

Title: Onboard a flight from RCTP to EDDF
Post by: chungping on December 27, 2007, 09:52:04 AM
ADS-B signals not received until reaching Europe.

[attachment deleted by admin]
Title: Re: Onboard a flight from RCTP to EDDF
Post by: AirNav Support on December 27, 2007, 09:23:36 PM
Nice pictures. That's interesting to note it was not broadcasting untill in Europe. I assume it must have broadcasting when it took off (but probally wouldn't have allowed you to have your laptop on)?
Title: Re: Onboard a flight from RCTP to EDDF
Post by: boss on December 28, 2007, 12:02:31 PM
I did not know airlines allowed the use of scanners or RB boxes on flights
Title: Re: Onboard a flight from RCTP to EDDF
Post by: chungping on December 28, 2007, 10:29:36 PM
I checked the regulations with the authorities... Radio receivers are allowed over 10,000 ft.
Title: Re: Onboard a flight from RCTP to EDDF
Post by: palmar on January 02, 2008, 10:30:05 PM


Everybody should be aware that Radarbox qualifies as a radio receiver and usage in flight a commercial airplane is strictly prohibited by IATA, FAA and other state and operator regulations, because viable aircraft systems can be disturbed by the unit's local oscillator.

QuoteI checked the regulations with the authorities... Radio receivers are allowed over 10,000 ft.
This is a regulation by the FAA that is true for other non-transmitting electronic devices like laptops, walkmen, gameboy... - but not radio receivers, these belong to transmitting devices as the contain a local oscillator that transmits RF power through the receiver's antenna.