Print Page - Only power light on - hardware not connected message

Title: Only power light on - hardware not connected message
Post by: anodes on February 03, 2011, 09:12:51 AM

HI All, just had to replace my HDD, also installed Win 7 64bit, loaded my ANRB disc, cannot connect to the radar box, reads hardware not connected although the power led is on. Have checked out the radar box with my laptop, all OK. Thanking in advance for any assistance. I still have my suspect HDD so I can get all logs & pictures off later.
Thanks Stephen

Title: Re: Only power light on - hardware not connected message
Post by: tarbat on February 03, 2011, 09:25:19 AM

You'll need the 64-bit drivers - from http://www.airnavsystems.com/download/ANRB/drivers/ANRB64bitDrivers.zip

Title: Re: Only power light on - hardware not connected message
Post by: anodes on February 03, 2011, 09:47:41 AM

Great, thanks tarbat, done as you suggested - appears to be working, had to download WinZip - only installed new HDD + S/W late last night. many thanks again,
Stephen

AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: anodes on February 03, 2011, 09:12:51 AM