AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: rashers on March 27, 2011, 04:55:39 PM

Title: hardware issuses
Post by: rashers on March 27, 2011, 04:55:39 PM
hi lads my radar box running fine one minute and the next the light goes from green to red in hardware when i plug out from back and plug back in it goes green again for a minute and then red can anyone help regards keith
Title: Re: hardware issuses
Post by: chewycanes on March 27, 2011, 05:02:27 PM
Hi Rashers

It may be worth trying a different USB cable.

Brian
Title: Re: hardware issuses
Post by: rashers on March 27, 2011, 05:24:45 PM
tried it brian still no joy coming up usb not regonized
Title: Re: hardware issuses
Post by: chewycanes on March 27, 2011, 05:52:43 PM
Rashers

I can only suggest you reload the drivers on the basis that they have been corrupted somehow.

Brian
Title: Re: hardware issuses
Post by: Runway 31 on March 27, 2011, 06:03:30 PM
Try closing down the computer and switching back on.

Alan
Title: Re: hardware issuses
Post by: rashers on March 27, 2011, 07:05:25 PM
tried this aswell no joy im gutted to be without this whats my next step alan
Title: Re: hardware issuses
Post by: Runway 31 on March 27, 2011, 07:14:55 PM
If the system tells you that it isnt recognising the USB, it would appear to be a USB problem, try loading in the drivers again.  Disconnect the cable and dont connect the cable until after you have finished loading the drivers.

Alan
Title: Re: hardware issuses
Post by: rashers on March 27, 2011, 07:58:11 PM
also tried i think its a problem at the back of the box usb port faulty i have a guy looking at it in the morning he reakons a bad connection at the back fingers crossed thanks lads for all your help regards keith shannon ireland location