Text only | Text with Images

AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: trev on April 13, 2014, 05:15:50 PM

Title: Hardware not activating
Post by: trev on April 13, 2014, 05:15:50 PM
Hi,
I have just installed my software for the box onto a different computer and it is saying it does not recognise the drivers. The software downloads but when i open airnav the red light is on saying hardware not connected. It's a 32 bit system. It works on my laptop ok, but it doesn't recognise the drivers on this computer or my netbook. Any ideas?

Thanks in advance

Trevor
Title: Re: Hardware not activating
Post by: Runway 31 on April 13, 2014, 05:31:52 PM
What windows version are you using other than 32bit

Alan
Title: Re: Hardware not activating
Post by: trev on April 13, 2014, 05:39:08 PM
windows 7 Alan
Title: Re: Hardware not activating
Post by: Runway 31 on April 13, 2014, 05:52:10 PM
There shouldn't be any problems.  Which RB software version are you using

Alan
Title: Re: Hardware not activating
Post by: trev on April 13, 2014, 06:13:36 PM
The original one i got with the box, it's coming up 2009 but i have tried to update it to 5.00.071 but it hasn't on  this computer. It updated on the laptop ok which is running Vista, but when i open it it still says version 2.01. the computer is saying it is not recognising the drivers for some reason?

Confused

Trevor
Title: Re: Hardware not activating
Post by: Runway 31 on April 13, 2014, 06:20:39 PM
Trev

5.00.71 is an upgrade.  Try downloading and installing the last full install v5.00.65 from here. 
http://www.airnavsystems.com/download/ANRB/ANRB50065Setup.exe

Uninstall the original one and Install to c:\Airnav, don't use the programme files location

Alan
Title: Re: Hardware not activating
Post by: trev on April 13, 2014, 07:18:11 PM
Tried all of that Alan, the two blue lights on the box are flashing slow now were as they weren't on at all before. However it's still saying hardware not connected.
Thanks anyway.

Trevor
Title: Re: Hardware not activating
Post by: Runway 31 on April 13, 2014, 07:27:55 PM
What happens when you take the USB cable out, try pulling it out and in again to see if anything happens.  Normally you should install the software and attach the cables to finish off the driver installation.

Alan
Title: Re: Hardware not activating
Post by: trev on April 14, 2014, 05:23:34 PM
nothing Alan, tried pulling them out and reinserting but still showing hardware not connected. Must have something to do with the drivers as this is the second computer not to recognise?
Title: Re: Hardware not activating
Post by: Runway 31 on April 14, 2014, 05:31:54 PM
It cant be the drivers Trev if they are working on one of the computers.  I use Windows 7 as do many others.  Maybe you better drop support an email for their help [email protected].  Are you sure the USB cable is OK.

Alan
Title: Re: Hardware not activating
Post by: trev on April 14, 2014, 05:52:26 PM
Cheers Alan, yes as soon as i plug it into the original computer it recognises it straight away. Thanks for your input anyway.

Trevor
Title: Re: Hardware not activating
Post by: Runway 31 on April 14, 2014, 06:13:24 PM
Trev,

The software normally does for two computers, for another computer after that Airnav require to reset at their end, don't know if that may be the problem.

Alan
Title: Re: Hardware not activating
Post by: trev on April 14, 2014, 07:37:00 PM
Thanks Alan

Trevor
Text only | Text with Images