3.07 Install trouble

GreekSpy2001 · October 27, 2009, 07:13:15 PM

Hi

Just had to reinstall mt XP PC. Thought I would go direct to 3.07. Have the full version. INstalled logged in automatically wants to have the home data added. However when I enter this the OK or Apply bittons do not work. If I cancel I resent to this. In a complete loop that I can't fix. Also noted that no map colours are set have to physically select a colour scheme or the there are no Grid Visible columns to tick!!!

Will try to install and early version to upgrade the registry

Graham

GreekSpy2001 · October 27, 2009, 07:21:28 PM

OK just installed 3.06 and get the same problem. Can't save the settings.

Any one any ideas as to what is wrong?

GreekSpy2001 · October 27, 2009, 07:28:56 PM

OK I have found the OK and Apply buttons didn't work. However if I clicked Cancel it saved the data and I could carry on!!! The I could go back into Preferences, set the info and and use the OK and Apply buttons. Guess its a bug.

Graham

DIAPHONE · October 30, 2009, 10:41:11 AM

Having the same problem here in 3.07Beta. Cannot display Home Station on the display. Enter Lat & Lon which it saves. Press Apply and then OK but will not display. Any ideas?
From Diaphone on Portland

Fenris · October 30, 2009, 12:26:57 PM

Quote from: DIAPHONE on October 30, 2009, 10:41:11 AM
Having the same problem here in 3.07Beta. Cannot display Home Station on the display. Enter Lat & Lon which it saves. Press Apply and then OK but will not display. Any ideas?
From Diaphone on Portland

Can you explain exactly what data you enter, it could be a format problem. RB expects decimal degrees and for west of Greenwich to be a negative number.

Runway 31 · October 30, 2009, 12:33:28 PM

If you right click your position on the map you can save as your home location.

sterigia · October 30, 2009, 01:00:14 PM

i think apply and ok buttons do not work with rb as per convention. that is apply to apply and ok to save
ciao
frank

DIAPHONE · October 30, 2009, 01:28:24 PM

Going to preferences/selecting Home Station/Entering Lat &Lon 50.5436 & -2.4368/Apply/OK. The Home Station page diappears, as it should but, there is
no graticule over my location+. Being running v3 for over a year no problem.
Larry/portland

DIAPHONE · October 30, 2009, 01:55:27 PM

Same here Frank. The Apply and OK Buttons do not seem to work in the Preferences section. Especially in the Home Station Data menu.
Larry
Portland

sterigia · October 30, 2009, 02:03:08 PM

my installation problems were resolved by this method
1, install version 2 in a folder in root c:\airnav and set all prefernces
2,uninstall via control panel version2
3, install version 3 into the same folder, c:\airnav, it keeps some files and configurations.
good luck
ciao
frank

RodBearden · October 30, 2009, 05:21:09 PM

Diaphone - have you checked the box on the Preferences.. Radarbox tab to actually display your home location - circled below...

Rod

DIAPHONE · October 30, 2009, 05:37:04 PM

Hi Rod
I am now very embarassed!!
All working fine.
Larry
ps. And many thanks

RodBearden · October 30, 2009, 05:39:36 PM

No problem Larry :-)

Rod

Jeremy · October 30, 2009, 07:35:07 PM

Quote from: DIAPHONE on October 30, 2009, 05:37:04 PM
Hi Rod
I am now very embarassed!!
All working fine.
Larry
ps. And many thanks

Oh Larry!!!!put thy telescope to thy eye!
J.

3.07 Install trouble

Fenris