Main Menu

New box.

Started by colhot, April 01, 2016, 09:17:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

colhot

Hi

I have just purchased a used radar box and it is asking for a username/password,  where does this come from?

Also I have loaded the latest drivers etc,  but I only have the green power light on.  Would the other lights come on when the software is unlocked?

Thanks

Colin

neroon79

Hi Colin,

usually the Password (9 Numbers) and the username (e.g. PGANRB300066) can be found on a label attached to original Software installation CD.

If you haven't one: search for the label with the serial number (e.g. ANRB00304 or so) on your box (usually on the backside / bottom of the box).  With this number contact [email protected] (http://www.airnavsystems.com/contact.php) to get a new set of password and username.

Regards Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

colhot

Hi

Just to let you know, when i recieved the box there was no label with the required information. I contacted support and they were very helpful and quick in supplying the information.

Many thanks

colin (UK)

neroon79

Many thanks for your feedback.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3