AirNav RadarBox 2009 - 3.08 Beta - Released

Started by AirNav Development, November 05, 2009, 04:36:05 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

ACW367

Peter, Airnav has a relatively low-res worldwide coastline because of bandwidth.  You can download a hi-res European coastline from this website (you have to install a small programme to allow the download) http://www.sbs-resources.com/downloads/index.html

If you do download the outline, you will need to disable the default states outline on the general signs tab.  If you are unsure how to use outlines, refer to http://www.airnavsystems.com/forum/index.php?topic=58.0 or the outlines thread http://www.airnavsystems.com/forum/index.php?topic=717.0

Peter45

Quote from: ACW367 on November 14, 2009, 01:04:47 PM
Peter, Airnav has a relatively low-res worldwide coastline because of bandwidth.  You can download a hi-res European coastline from this website (you have to install a small programme to allow the download) http://www.sbs-resources.com/downloads/index.html

If you do download the outline, you will need to disable the default states outline on the general signs tab.  If you are unsure how to use outlines, refer to http://www.airnavsystems.com/forum/index.php?topic=58.0 or the outlines thread http://www.airnavsystems.com/forum/index.php?topic=717.0
Hi ACW367, many thanks for the excelent tips. It works and my countryborders are correct now.
The next " minor problem" is, how can I filling-in de land colors between  the "new" borderlines ;-))
Perhaps I can ask my youngest grand-daughter to do this.......

Best regards, nice weekend.

Peter

RodBearden

Peter - if you find out, do let us know - no-one round here knows a way of doing this!

Rod
Rod

dwilder

Now that the 64bit drivers are available, i'd like to try RB 3.08b.

However, I can only find the upgrade patch from 3.0? to 3.08 and not a full install.

Any idea where this is kept?

Dan

RodBearden

Here's the full install of 3.07 - http://www.airnavsystems.com/forum/index.php?topic=3582.msg34977#msg34977  install the upgrade after you've done the full install.

Rod
Rod

Dan

Hi All ,

With 3.08 Beta the transfert between My flights  and  Real Time Network flights takes  several minutes whereas in 3.06 Beta the transfert is really perfect .
When checking flights into EBBR I'am loosing  the aircraft in  My Flights when they are about 2000ft asl . With version 3.06 Beta about 20 to 30 seconds ( max.) later they show up  again via Real Time Network. With version 3.08 Beta they never show up or sometimes minutes later when they allready have landed  .
Using the same settings for :
My Flight Time out = 20              Network Flights Time out = 75
               Hide      =  5                                    Hide       =  5
In the meantime I switched back to 3.06 Beta because it is a joy to use Real Time Network .
Rgds
Dan.

Allocator

Real-time is fine for me with Beta V3.08 watching all the traffic around Heathrow, Gatwick, Stansted etc and the transfer is seamless.

Dan

Alocator,
Thank You for your reply.
I also thought transfert was seamless until I checked it on EBBR arrivals where the time between loss of aircraft in My Flights and actual landing of that aircraft is minimum . But with Beta v3.06 it is working perfectly . I am losing aircraft at abt 2000ft and they show up again in Real Network maximum 30s  later on an altitude of abt 1700ft.

In Beta v3.08 it seems that the transfert time is greater than 3mins  ( alt. 2000ft /  700ft/min ) so they do not show up via Real Network because they have landed  allready.

To upgrade to Beta v3.08 I only replaced the V.3.06exe by the V3.08exe file . I did not upgrade to V3.07Beta  in between . Maybe this has to do something with it...

How far are you located from those airport and at what altitude are you losing aircraft in  My Flights ?
Rgds
Dan.


RodBearden

Dan - it is recommended that you go to 3.08 via 3.07 - do the full install of 3.07 then the upgrade - you might get a different outcome.

Rod
Rod

Dan

Rod ,
Thank You for yr reply.

1. Complete Uninstall of  Beta v.3.06 .
2. Complete install    of  Beta  v.3.07.
    Everything working perfect with seamless transfert  ( about 30 Secs. )

3. Replaced v.3.07exe  by  v.3.08exe .
    Transfert time between My Flights and  Real Network  about 4 a 5 minutes.

I am running now Beta v.3.07Beta .

Rgds
Dan

porter

Quote from: Dan on November 16, 2009, 10:27:01 AMTransfert time between My Flights and  Real Network  about 4 a 5 minutes.

Sound like you don't have the real-time network.  Does it say "Real Time Network: 00:20 to Update"?

Dan

Hi Porter ,

I have the Real Time Network and it says indeed  "Real Time Network: 00:20 to Update"? .
In the direction  Real Time Network to " My flights "  the transfert is correct .

Thanks/Regards

Fenris

I take it that those saying "it's OK" have checked it in both directions?

airman

Hi,
I am always in 3.06, but no way to get the other versions as 3.07 and 3.08.
Where is the correct adress to get them?
Thanks

GreekSpy2001

 
Quote from: airman on November 17, 2009, 02:38:19 PM
Hi,
I am always in 3.06, but no way to get the other versions as 3.07 and 3.08.
Where is the correct adress to get them?
Thanks

The 3.08 link is on the first page of this thread

graham